Parts to Convert a B64 to a B64D

Building notes

  • Use the #92084 B64 Spur Gear, 78T 48P if you are going to run in the 13.5 class.
  • Do not use the #92010 B64 Gearbox Shim in the B64 kit that goes under the case.
  • Swap the B64’s #25204 3x16mm FHCS to the B64D’s #25202 3x10mm FHCS.
  • Use the B64D setup sheets to build the car for dirt
  • Build rear shocks using the short shock eyelets.
  • See the RC10B64D instruction manual for assembly.
  • The B64 slipper clutch can be used when running 13.5 motors on dirt.

Get these parts to convert

(These fluids optional. Recommended for starting setup.)
#5422 FT Silicone Shock Fluid, 30wt (350 cSt),
#5459 FT Silicone Diff Fluid, 100,000 cSt

#92051 B64 Anti-roll Bar Set, Front

#92029 B64 Aluminum Caster Blocks, 10 deg.

#92053 B64 Anti-roll Bar Set, Rear

#91331 FT 12mm Front Springs, yellow, 3.75 lb

#92065 B64 Center Dogbones, gear diff

#91336 FT 12mm Rear Springs, green, 2.00 lb
(Build rear shocks using the short shock eyelets)

#92077#92077 Diff Rebuild
#92078#92078 Gasket, O-rings
#92080#92080 Cases
#92082#92082 Outdrives
#92083#92083 Center Diff Cap
#92065#92065 Center Dogbones

Source: