PDF File

We have optimized the Banpusutea change to put 3 mm spacers on the steering crank under an angle so as not to stick to the steering rod.

Since raising the position of the steering crank, impossible is not applied to the linkage, we have changed every other side of the servo. (Servo mounting method of Lowepro servo only)

Change to the Teflon spacer, the load has not applied to the front spring under. Stage is on to be able to center the spring in the original Fukushimaya Teflon spacers.

We are adjusting the position of the spring by extending the screw of the side spring. We will pod brace assembly of options if it is released, spring also change to the out side.
Zeppin crazy fan 30mm are fitted with a higher position in combination a stay of ZEN.

Note: text abone is a raw translation from Japanese.