7. Toe-in bar

The X-6² behavior is related to the toe-in bar height. The stock toe-in bar give three degrees (3°) and four degrees (4°) angles, Team AJ offers aluminum toe-in bar more accurate than the stock ones. Shims (1.0mm, 1.5mm, 2.0mm) can be added be below the toe-in bar to change the anti-squat angle.

X-6Sq is found that the characteristics vary greatly in height Toinba angle.  Plastic Toinba so wanted to have three degrees and four degrees between the characteristics, TEAM AJ to sell Toinba produced from aluminum. 　And aluminum relative to the three degrees
Resin 3 degrees (2.5 °) <Aluminum 3 degrees (3.0 °) <resin 4 degrees (3.5 °) <aluminum four degrees (4 °)
Angle brackets are used when feeling. The role of Riyasasu tend to be significantly less toe-in essence, become the throttle while the car out before the trend becomes more demanding role for the throttle. Also, under Add Toinba Anchisukuwattoshimu 1.0mm · 1.5mm · 2.0mm and replace, change comes out before I feel like changing the role of changes in Toinba Riasasu. Toinba These changes are less than to change the setting items is the best fine-tuning.
Note Toinba photo is not of anodized aluminum.

7. Toe-in bar