- Tamiya TRF201X Vega - Lee Martin - Indoor Base Setup - 2012 -


Front End:
Shocks: MR33 600wt Oil – 1.3 x 2 hole piston – Red X-Gear Spring (or Tamiya Blue)
Tower: 2nd hole in
Arm: outside hole
Hubs Middle on arm and on caster block
30 degree caster
2.5mm bump steer washer
Ackerman position forward
LMR Brass Bulkhead
Middle:
Lipos down middle
72g Rudebits brass
7.5 Speed passion motor and GT2.0 ESC with stadard settings
23 pinion on 79 spur
Rear:
Shocks: MR33 450wt oil – 1.4 x 2 hole piston – Red X-Gear spring (tamiya blue)
Inside hole on the tower
Middle hole on the arm
Plastic hubs – Forward link in middle
Rear arms dremeled down 2mm on and moved back 2mm.
XA Front block with 1mm Antisquat washer
3.0 degree rear block, low pin.
Tower link in middle vertical row of holes and 1 up from middle
br Diff tight
LMR Electra Wing
Tyres:
Front tire: Stagger rib
Rear tire: Answer RC blue inserts in Schumacher pins


Source: