Items needed:
  • U7383 - C/F Shorty Spacer pr - L1/EVO

  • U7611 - SPEED PACK - M3x14 Button Hd (pk10)

  • U8194 - LiPo Mouldings - LD2


3x12mm button heads were used and depending on how thick your shortly pack is would need to be spaced so the 3x14 button heads will work here as well.

You will need 3mm nyloc nuts for the mounts as well.

The carbon shorty spacer was used for strength as you will need to drill a 2.5mm hole at 28.25mm from the back hole. This can be adjusted to however you would like, we have found this to be a great overall position for the hold down screw location.

Source:

J. Wright