Made by Arn0(@PetitRC.com)
Written on 2009.08.23
Edited on 2013-09-05
-
1:10th Off-Road Wings -
The page dedicated to rear wings as the one dedicated to the front wings summarize the optional wings available for both 2WD & 4WD electric buggy at the date indicated above.
You will find the manufacturers technical details about what wing to use in which circumstance.
For any comment, advice or additional information about wings, you can use this thread.
Cette page dédiée au aileron arrière ainsi que celle dédiée aux ailerons avants regroupent les ailerons optionnels pour les buggies deux et quatre roues motrices à propulsion électrique à la date indiquée ci-dessus.
Vous trouvez les explications données par les fabricants quand à l'usage de quel aileron dans quelle condition.
Pour tout commentaire,avis ou ajout d'information sur les ailerons, vous pouvez utiliser ce sujet.
AZ-0001 - Azarashi Wing
1 straight type wing and 1 round type wing
High downforce / Appui élevé
Round
Straight
----------------------------------------------
AZ-0001L - Lightweight Azarashi Wing
1 straight type and 1 round type
20% lighter than the standard Azarashi Wing (AZ-0001)
Round-type for technical track / Type courbé pour les pistes techniques
Straight type for high-speed track / Type droit pour les pistes rapides
Round
Straight
----------------------------------------------
AZ-0001S - Azarashi Wing Light Tint Color
1 Straight type and 1 Round type
----------------------------------------------
AZ-0016 - Bravo
Generates more moderate down-force than our existing Azarashi Wing / Génère plus d'appui que l'aileron Azarashi
AZ-0031 - Splend wing
High controlability in jumping, high downforce, and smooth cornering
0107 - JConcepts 6” wide high downforce wing Recommended for use on larger high speed tracks with a medium to high traction surface. Recommandé pour les pistes rapides avec une adhérence de moyenne à forte.
----------------------------------------------
0108 - JConcepts 7” wide high downforce wing Recommended for use on larger high speed tracks with a low to medium traction surface. Recommandé pour les pistes rapides avec une adhérence de faible à moyenne.
----------------------------------------------
0109 - JConcepts 7” wide high downforce V-wing Recommended for use on larger high speed tracks with a low traction surface. Recommandé pour les pistes rapides avec une adhérence faible.
----------------------------------------------
0114 - Illuzion - 6" wide high downforce V-wing
Recommended for use on larger high speed tracks with a medium to high traction surface. The
6" V-wing maintains a higher stance much like the 7" V-wing for maximum flow exposure. A narrower overall width makes for quick transition corner to corner. Recommandé pour les pistes rapides avec une adhérence de moyenne à forte. L'aileron de 6" de large en V fournit un appui similaire à l'aileron de 7" de large en V. Sa largeur plus réduite fait qu'il permet des transitions plus rapide entre virages.
----------------------------------------------
0116 - 6.5" wide high downforce wing (0047 direct replacement)
----------------------------------------------
0117 - Illuzion 6.5" V-wing
Direct fit for the B4 and B44 / Se monte sans ajustement sur B4 et B44
----------------------------------------------
1100HD6 - BJ4 Worlds 6" high down force wing
The high down force 6” wide wing was specifically designed for the IFMAR World Championships and was used to TQ and win the 4wd class. Works on all brands of 2wd and 4wd cars. L'aileron à appui éléve de 6" de large a été conçu spécifiquement pour les championnats du monde IFMAR.
S'installe sur toutes les voitures deux et quatres roues motrices.
----------------------------------------------
0133 - JConcepts 7" Hi-Clearance Wing (Direct fit on the B4 and B44 vehicles)
Based on the popoular 6.5” Hi-Clearance wing by JConcepts, the high down force 7” wide wing was specifically designed for more stability during low and high speeds which provide some much needed grip in tricky situations.. Works on all brands of 2wd and 4wd cars.
----------------------------------------------
0135 - JConcepts 7” Hi-Clearance (Direct fit on the TLR 22 vehicle)
A slightly wider base gives the wing a larger surface area which allows more stability during low and high speeds which provide some much needed grip in tricky situations. The Hi-Clearance sections near the end plates still allow maximum suspension compression and tire expansion.
----------------------------------------------
0137 - JConcepts 7” 6.6? Hi-Tension wing
Specifically designed for mid-motor applications
Tech Tip - Tuning 10th Scale Wings
LMR
LMR's First wing comes in the form of the Electra!
The wing itself has been formed from 1.5mm Lexan, which makes this little beauty as strong as it is beautiful. The Electra’s innovative side plates are designed to increase the amount of sideways grip we often need, protruding 15mm further forward than conventional wings.
The ‘Electra’ wing gets its name from a blue-white giant star in the constellation of Taurus. This perfectly formed star is sure to make the LMR Star shine brightly!
As used on the European Championship winning 2wd in 2012 as well as many team drivers using the wing from the teams of Tamiya, Kyosho, Associated, Losi and Schumacher
Proline
6232 - 1:10 Off-Road Wings
Includes:
2 x High Downforce wings (6.625")
1 x Medium Downforce wing (5.8125")
2 x Standard Downforce wings (5.4375")
3 x Front Spoilers
----------------------------------------------
6245 - 1:10 Off-Road Buggy Wing (2 pk)
----------------------------------------------
6247 - Pro-Line Stabilizer 6.5" 1:10 Buggy Wing (2 pcs)
- increase in rear traction and high-speed stability
- features a stepped side wing profile to clear the rear tires
----------------------------------------------
6248 - Pro-Line Stabilizer 7" 1:10 Buggy Wing (2 pcs)
- increase in rear traction and high-speed stability
- features a stepped side wing profile to clear the rear tires
Rudebits
BRCA, ROAR, IFMAR, EFRA andFEMCA legal
The R1 wing has been designed for maximum efficiency of air distribution and downforce.
Its straight rear edge allows the air to force down evenly across. Likewise its front edge has no distortion edge or shape so the air is directed evenly.
4deg base angle built in
Made from 1.5mm pure lexan, the R1 is very strong and long lasting
Schumacher
Wing Talon Off Road - Specially designed for increased downforce and jump stability. Tune the amount of downforce with easy cut lines on the top of the wing. Conçu pour augmenter l'appui et la stabilité lors de sauts. Ajuster l'appui aisément en découpant suivant les lignes sur l'aileron
U5113 - White
U5114 - Black
U5115 - Carbon Look
U5117 - Clear
Sweep
6.5" wide rear wing for 1/10 buggy
X-Factory
6 1/2” buggy wing is slightly lighter than the standard X Factory wing.
