The surface is hard packed, high bite/blue groove.

Front:

3-B Pistons
35wt Losi Oil
Black#70 Springs
Shock Ends Unscrewed 1 turn using smallest ball cup/Tall shock caps

Shocks Mounted outside on tower and middle on arm

1-A Camberlink (inside on bulkhead and inside on caster block) with 2mm ball stud washers under the ball stud
Spindles spaced up
Casterblock spaced all the way forward
0 shims under steering ackerman ballstud
25 degree kick up with small shim
Added 1 1/2oz of weight in front end

Tyre: J-Concepts Bar Codes White (stock foam used)

Rear:

3-B Pistons
30wt Losi Oil
Blue Springs
No limiting using smallest ball cup

Shocks Mounted inside on tower and inside on arm/Tall shock cap

2-B Camberlink (middle on bulkhead and outside on hub) with 2mm washers under ball stud on bulkhead and 2mm ball stud washer on hub
Hubs spaced forward/middle (2mm spacer in front of hub and 3mm spacer behind hub
2 degrees of anti-squat (standard) no shims used

Tyres: J-Concepts Bar Codes Orange (PL 2-Stage foam used)

Added 30grams total to chassis (10grams between battery post and ESC & 10grams between battery post and Receiver and 10grams to offset receiver weight.

2 big pads with 1 skinny in front of battery.

Lower rear body mounting position

Team Orion 3800 Li-Po Battery
Team Orion 7.5 Vortex V2 Motor
Gearing: 19/stock spur gear
KO Propo ESC with Smooth Custom Profile