- Kyosho RB6 - Jason Dias - OCRC - 08.01.2014 -
This past week at OCRC I was able to set a new stock buggy track record of (13/5:05.711) with a fast lap of 22.859. Previously the track record was a 13/5:09 set by Derek Furutani, and then Sean C set a new one at 13/5:08.9 but nobody has gotten into the 22 second lap time range. Anyways I felt this was a good time to share my setup. Warning: It’s kind of extreme due to the removal of some standard pieces to cut weight and add flex.
PDF File

Some key parts to note on this setup:
- Lightweight Body (UMB03LW)
- Lightweight Chassis (UMW720)
- Carbon Front Tower(UMW714)
- Carbon Front Arms(UMW710)
- Carbon Knuckles(UMW712)
- Carbon Hub Carriers(UMW713)
- Carbon Rear Arms(UMW711)
- Carbon Rear Tower(UMW716)
- Carbon Trans Case (Coming soon)
- Alum Idler (UMW718)
- Aluminum Front Axle(UMW507)
- Titanium Screws (UMW703)
- Velvet Shafts (TFW008)
- 62.5mm Shafts w/ 3 line axles (UM510)
- Chassis Protector KA40001
- Alum Crank Arm (UMW702)
- Alum Steering Rack (UMW701)
- Waterfall Removed for more rear end flex (See Picture. Trans to Chassis brace)
- Ceramic Bearings
- Battery Servo Taped In + Strapping Tape
- 66Gram Brass Weight Added under battery (Required to make minimum weight 1499g, buggy came in at 1439g without weight)
- Rear wheels spaced out .5mm (3RAC-WX12SP) between hex and wheel, 5x10x4 ceramic bearings used in hubs
- Extra parts removed to save weight, battery holders, mounts, trap, and tray. ESC wires as short as possible.


Source:
J. Dias
|