Here it is, fastest 17.5 buggy last weekend at FCC. Driver didn’t show up on main day but the potential was high. You’re going to need 2xD418 swaybar kits and 1.0mm piano wire or XRAY rear bar, AE 69mm bones and +2mm axles(will need the barrel and pin as well), AE yellow V2 springs 12mm F/R, AE 12mm spring perch’s along with AE +0 shock ends(our balls fit). I ran AE gullwing front arms as I ran out of spares but if using HB front arms you’ll have to dremel quite a bit out of the insert/arm.