Front:
35wt
Red Piston
Internal Spring
Middle on Shock Tower
Inner hole on Wishbone
Silver Spring
Camber Link:
Inner on carbon plate with 1mm washer under ball stud
Outer on Hub Carrier
Rear:
30wt
Blue Piston
2 mm spacer to stop driveshaft popping out of the outdrive
Inside hole on shock tower
Inner hole on wishbone
Pink Spring
Camber Link:
Outer hole on carbon plate with 4mm spacers under the ball stud
Middle hole on Hub Carrier
Other:
Short Wheel Base
1 Washer under anti squat plate
Wishbones level all round
If it's really bumpy I run a diff in the front, otherwise a One
way.
If the bumps are more random than
undulating and / or there are some biggish jumps I tend to
straighten the rear shocks up and remove the anti squat spacer