SETUP SHEET FOR THE RC10T3

date 9/98 driver MIKE WALKER track K & M RACEWAY BRAND TERRACE, CA

FRONT SUSPENSION
Front Block Carrier (caster setting): 30°
Front Ride Height: Arms level
Steering Block STD
Weight in Bulkhead: 1/2 ounce

Camber -2 deg. Steering Ackerman:

Toe-in: 2°

1 outside
2 inside
3 middle

FRONT SHOCKS
Limiters, inside 0
outside 0

Oil 30wt Shaft 1.02
Piston #2 Spring green
Body 1.02

Front antiroll bar: none

REAR SUSPENSION
Susp mounts: 3-3, with washer underneath
Rear Ride Height: bones level
Anti-squat: 1.5 deg.

Camber -3 deg.

Wheel Hub Placement

1 middle
2 inside
3 outside
4 STD

REAR SHOCKS
STD

Limiters, inside 0
Limiters, outside 0

Oil 30wt Shaft 1.32
Piston #1 Spring green
Body STD

Front Tires M2 Edge, Foam STD
Rear Tires M3 Stepping, Foam Firm
Front Wheels 1 piece
Chassis XLong
Radio ______________ Spd. Cntl LRP V6
Servo __________

Motor 10 x 4 Pinion 17
Spur Gear 90
Driveshafts MIP CVD's
Slipper STD
Battery Type Zappers 2000
Placement Middle

Off Road Track Conditionssmooth soft dirt -- wet other: very little loam, mostly hard packed med. traction	Race Comments:
	Vehicle Comments:Works very well.