SETUP SHEET FOR THE RC10T3

date 8/25/98  driver Jim Cooley   track  Bear Creek Raceway Woodinville, WA
FRONT SUSPENSION Front Ride Height: arms-2 deg.  below level Steering Block: inline Weight in Bulkhead: none Camber -3 deg. Steering Ackerman: STD	Toe-in: 0° Toe-out: 0°	1  inside 2  middle 3  middle
	FRONT SHOCKS Limiters, inside 1 outside 0 Oil  30wt   Shaft 1.02 Piston  #1  Spring   green Body 1.02 Clamp to cap dist.: very snug Front antiroll bar:  none
REAR SUSPENSION Susp mounts:  3-3 Rear Ride Height: universals -2 deg. below level Anti-squat: STD 3 deg. Camber ________	Wheel Hub Placement 1	1   middle  2  inside 3  inside 4  STD Rear antiroll bar: none
REAR SHOCKS Clamp to cap dist.: 1/4" Limiters, inside 1 Limiters, outside 0 Oil  30 wt   Shaft 1.32 Piston  #1  Spring  green Body 1.32
Front Tires Losi Red, Foam: Losi Rear Tires Pro-Line Bowties, Foam Pro-Line Front Wheels 1 pc Pro-Line front & back Chassis STD Radio  Futaba   Spd. Cntl  Tekin Servo  Futaba		Motor Midnight 2 stock   Pinion 18 Spur Gear 84 Driveshafts CVD_ Slipper STD Battery Type 6 cell 2000 Placement 1 spacer in front, 2 in back

Off Road Track Conditions, circle all that apply: bumpy hard packed clay damp to dry other: Track watered between each heat, goes from damp to dry depending on temp. high traction	Race Comments:
	Vehicle Comments: A-main winner, Truck Stock. Race every Sat night for 13 week season.