SETUP SHEET FOR THE RC10T3

date 2-16-98 driver Frosty St. Clair track K & M Raceway, TX

FRONT SUSPENSION
Front Block Carrier (caster setting): 30 deg.
Front Ride Height: arms level
Steering Block STD
Weight in Bulkhead: 1/4 ounce.

Camber -2.5

Steering Ackerman:
STD

Toe-in: 0 deg.
Toe-out: 0 deg.

1 outside
2 outside
3 middle

FRONT SHOCKS
STD
Limiters, inside 2 thin
outside 0

Oil 35wt Shaft 1.02
Piston #2 Spring silver
Body STD

REAR SUSPENSION
Susp mounts: 3-0
Rear Ride Height: dogbones level
Anti-squat: 0 deg.

Camber -2.5
rear toe-in 3 deg.

Wheel Hub Placement

REAR SHOCKS
STD

Limiters, inside 0
Limiters, outside 0

Oil 30wt Shaft 1.32
Piston #2 Spring green
Body STD

Front Tires M2 Edge, Foam STD
Rear Tires M3 Fuzzie T, Foam firm
Front Wheels 1 piece
Chassis XLong
Radio Futaba Spd. Cntl LRP v6
Servo Futaba

Motor Mr. M Pinion 20
Spur Gear 87
Driveshafts MIP CVD's
Slipper STD
Battery Type Reedy 2000
Placement Rear

Off Road Conditions: Bumpy. Kind of a sandy hard packed clay, wet.

Race Comments: Jumps were rough, which made it hard to be consistent.

Truck Comments: Was very good. Just wish I had more time to play with battery placement.