- Team Associated B5 - Steering ball bearings improvement -
I just get the alloy steering levers, when I tight the screw to fix them on the rack I noticed than it's close to be impossible to tight it properly and let the steering be free.
To resolve this I use a reamer to improve the inner flange diameter over 5.5mm and under 6.0mm. Then I place between each bearings a 1mm spacer and assemble everything as originally. Threadlock is highly recommended to secure the screws in arms.
![](1.jpg)
![](2.jpg)
![](3.jpg)
![](4.jpg)
![](5.jpg)
![](6.jpg)
Source:
C. Devilliers
|
|
|
|