- Bag G - Rear Hubs and CVAs -
Previous - Next
The bag G contains all the parts to assemble the rear hubs and CVAs.
My build notes:
The hub shown in the manual is the left one. Pay close attention to not invert the left and the right hub during the build process.
![RC10B5_57](RC10B5_57.jpg)
The kit comes with two different link inserts. The insert with three mounting positions is the one to use for the stock setup.
![RC10B5_56](RC10B5_56.jpg)
Three different rear hub inserts are included in the kit. The zero degree inserts are those to use for the stock setup. They are clearly identified.
![RC10B5_55](RC10B5_55.jpg)
Make sure all bearing are perfectly inserted into the hubs.
![RC10B5_62](RC10B5_62.jpg)
Apply a very little amount of black grease to the CVA coupler.
![RC10B5_58](RC10B5_58.jpg)
![RC10B5_63](RC10B5_63.jpg)
![RC10B5_61](RC10B5_61.jpg)
![RC10B5_60](RC10B5_60.jpg)
![RC10B5_59](RC10B5_59.jpg)
Previous - Next
Source:
![](/reglages/myrcbox.jpg)
|
|
|
|