SETUP SHEET FOR THE RC10B3

date 2-16-98 driver Frosty St. Clair track K & M Raceway, TX

FRONT SUSPENSION
Front Block Carrier (caster setting): 25 deg.
Steering Block: STD

Camber: -2.5 deg.
Steering Ackerman: STD

Toe-in: 0 deg.
Toe-out: 0 deg. Antiroll bar: none

FRONT SHOCKS

1 outside
2 outside
3 inside

FRONT SHOCKS
STD
Clamp to Cap dist: .55"

Limiters, inside 1
Limiters, outside 0

Oil 35wt Shaft .71
Piston #1 Spring green
Body .89

REAR SUSPENSION
Susp mounts: 3-0
Wheel Hub: STD
Rear Ride Height: dogbones level
Anti-squat: 0 deg.

Camber -2.5 deg.
Toe-in: 3 deg.
Toe-out: 0 deg.

Wheel Hub Placement

#1
Antiroll bar: none

REAR SHOCKS

1 middle
2 inside
3 outside
4 outside

REAR SHOCKS
STD

Limiters, inside 0
Limiters, outside 0

Oil 35 wt Piston #2
Spring silver Shaft 1.02
Body 1.32

Front Tires M2 Pro-Line Foam STD
Rear Tires M3 Flat Fuzzie Foam Firm
Front Wheels 1 piece
Chassis STD, graphite
Radio Futaba Spd. Cntl LRP v6 Servo Futaba

Motor Mr X Pinion 20
Spur Gear 81
Driveshafts MIP CVD's
Slipper STD
Battery Type 2000
Placement Middle

Track Conditions: Kind of a sandy hard packed clay--wet.

Race Comments: Hard to go 4 minutes without flipping on rough jumps

Buggy Comments: Felt a little stiff, but had to set car up to get over the 15 jumps on the track.