3RACING 1/10 2WD BUGGY RACING CAR

3 Racing introduces their entry into the hotly contested 2WD electric off road buggy class, the “Cactus”.
Built from the accumulation of over 18 months of research and development, prototyping, testing and driver feedbacks, the result is a buggy that’s competitive straight out of the box at a reasonable price due to our improvements in the manufacturing processes.
The Cactus is fully adjustable to adapt to any track conditions, the kit includes all the parts need for Mid Motor 4 Gear Gearbox setup or the traditional Rear Motor 3 Gear Gearbox setup.

The Cactus in Rear Motor drive configuration

The Cactus in Mid Motor drive configuration

Machined Anodized Alum Pivot Pin Brace/Stiffener
- No E clip design throughout.

Rear Anti Roll Bar Mount (Anti Roll Bars not included)
- Replaceable Rear Pivot Pin brace allows rear toe and anti squat adjustments.

Wide Rear Wheel Hubs
- Minimizes axle vibrations and toe angle variations.
- Rebuildable Universal Driveshafts with bearing captured driveshaft pin design.

Industry standard Double Slipper Clutch
- Slipper Pad Housing made from machined hard coated 7075 Alum.
- Machined Anodized 7075 Alum Motor Mount.

Impact resistant composite Motor Guard

12.5mm Big Bore Shocks
- Composite Shock Caps with Oil Bleed Holes.
- PTFE Coated Threaded Alum Shock Bodies.
- Titanium Nitride Coated Shock Shafts.

Front and Rear 12mm Wheel Hex adaptors included

Front Suspension
- Trailing Axle Spindles.
- Oversized 5x10x4 Front Spindle Bearings.

Carb Forward High Downforce body

Molded Slipper Clutch dust guard with easy access hatch rubber sealed hatch

Stiff Composite Front and Rear Arms with Reinforcing ribs

Long Wheelbase Super Narrow Chassis molded composite chassis

Steering
- Optimised Ackermann Steering System minimizes any unwanted inside wheel play at maximum steering lock.
- Servo horn integrated adjustable servo saver.

Integrated Chassis Wiring Tunnels

Main Chassis
- Composite Rigid Battery Mount Plate with Flex Control System (Rear Motor only).
- Centralized ESC Mounting Graphite Plate.

Oversized Ball Caps throughout

3Racing 1/10 2WD Buggy Racing Car Specification
Overall Length: 410mm MAX
Overall Width: 250mm
Wheel base: 250mm
Weight: Approx 1600g

Cactus Features
- 2.6 Internal Reduction Gearbox.
- Rear Alum Forward Pivot Pin Mount.
- Rear Sway Bar Mounts.
- Titanium Nitride Coated Shock Shafts.
- CNC Machined POM Shock Pistons and Shaft Liners.
- Oversized Rear Hub Bearings.
- Metric Hardware all round.
- Wide Rear Hub minimizes axle vibrations and toe angle variations.
- Industry standard Double Padded Slipper Clutch.
- CNC Heatsink Motor Plate.
- Body and Tire Sets included.
- Fully Ball Raced.
- Rebuildable Universal Driveshafts with bearing captured driveshaft pin design.
- Impact resistant composite Motor Guard.
- No E Clips pivot pins design.
- Alum Front Arm Pivot Pin Stiffener.
- Composite Shock Caps with Oil Bleed Holes.
- PTFE Coated Threaded Alum Shock Bodies.
- Front and Rear 12mm Hex wheel adaptors.
- 12.5mm Big Bore Shocks.
- Carb Forward High Downforce body.
- 3 Gear Rear and Mid Motor 4 Gear Gearboxes included.
- Stiff Composite Front and Rear Arms with Reinforced ribs.
- Super Narrow Chassis.
- Oversized 5x10x4 Front Spindle Bearings.
- Trailing Axle Spindles.
- Optimised Ackermann Steering System minimizes any unwanted inside wheel play at maximum steering lock.
- Designed for Centralized Electronic Components Mounting.
- Dual ESC Mounting Positions.
- Composite Rigid Battery Mount Plate with Flex Control System (Rear Motor Drive).
- Integrated Chassis Wiring Tunnels.
- Composite Flex Optimized Chassis to provide the highest traction on low to medium bite tracks.
- Accommodates both standard and shorty Lipo batteries.
- Long wheelbase optimized for brushless motors and Lipo power.
- Oversized Ball Caps.
- Adjustable Heavy Duty Ball Differential.
- 80T 48 Pitch Spur Gear.