Front:

Shock mount: 3rd hole from outermost
Shocks: 30WT oil, almost zero rebound
Tamiya Blue springs
Ackerman: 2nd hole from front
Roll center: 1mm spacer under both arm mounts
1mm spacer on inner camber link
no spacer on the outer camber link (using middle hole)
0.5deg FR arm mount
lower hole on Chub, spacer on top kingpin screw
stock swaybar
2deg camber
0deg toe
1mm uptravel (droop)
center fixed pulley
front one-way or spool?

Rear:

Shock mount: 2nd hole from outermost
Shocks: 30WT oil, almost zero rebound
Tamiya Yellow springs
Roll center: no spacers under both arm mounts
1mm spacer on inner camber link
no spacer on the outer camber link
2deg RR arm mount, 0.5deg rear uprights (total 2.5deg toe-in)
lower hole on rear uprights
2 deg camber
2mm uptravel (droop)

Tires: Sorex 36R
Inserts: Sorex TypeC Medium

Body: Excel Accord