• Don't be scared to start with no sway bars and up to 5 degree rear toe at this track when it's green.

  • I raced with 1370g total weight. Note front bias and a little bumper weight for stability. I used a larger pack and 0mm motor spacing but I suggest 2mm motor spacing to promote some roll/side bite. Will require less chassis balance weight. I usually prefer a heavier car for low grip.

  • I ran an rcmaker chassis but kit with front brace would be ideal - better flex with rear diff window.

  • Try cuts to the mid rear cross braces of top deck. 1.6mm or other multi flex optional 2 piece should also be good.

    		•

    Source:

    B. Stewart