Base Setup ETS Carpet

Short front wheelbase
1.5 camber (optional)

15K on front kingpin
3mm front caster

Gold front spring (optional)
0.5mm wheel offset shims per side

0.6mm of front droop
3.2 front ride height

0.75 deg of toe-out per side
Outer hole Ackermann position

2mm bump steer shim
3mm behind servo (Sanwa SXR)

Middle center pivot position
No shims under center pivot on chassis

1mm side braces (optional)
Side braces disconnected from rear brace

Battery full forward
3mm under rear point of center dampener

450 cSt oil
Silver (kit) side springs, no preload

10K side tubes
Middle position for side links

2mm above front point of side links
Kit rear bump spring

3.6mm rear ride height
0.8mm of pod droop
No squat in rear pod (flat)

LensBodies Ponente UL, 89mm rear height
Hotrace Tyres Factory Hagberg Edition tires

Base Setup Black CRC Carpet