Chassis - Xray X12 ’24
Motor - Hobbywing 3.5T
ESC - Hobbywing XR10
Battery - Nosram 8100mAh
Tires (handout) - JACO
Radio/Servo - Sanwa M17 / Sanwa PGS HR
Body - Lens Bodies Ponente
Some setup changes were made to improve handling with the Jaco/BSR Magenta and Pink spec tires on this specific surface:
- Side braces removed for improved mechanical grip.
- X4 ULP center shock for improved forward traction. This is mainly because of the possibility to build the shock with 0 rebound, the increased oil volume, and there's the possibility to fine tune the spring setting (finer steps in between springs). I ended up using a C=2.7 spring.
The X4 ULP shock is possible to fit with the use of 2x X1 parts: 378062 (shock shaft) and 378072-K (spring retainer).
- The combination of less camber and more caster has been working very well for us with this tire.
- Some people asked about the PTFE chassis protector that I'm using. It's from Officina RC.
|
|
![](cf-alex.jpg)
![](/reglages/hobbywing/setuphwxerunxr10/XR10ProHD1S_AlexanderHagberg_Beachline2023120609/setup.jpg)
|