|
Tech Tip: Keep Your Springs Locked In Place!
Having trouble with your plastic spring retainers slipping out? Here is a quick, easy fix to lock them down:
1 - Flip the Screw: Thread a screw upside-down through the plastic retainer so the screw head faces the spring side.
2 - Secure the Spring: Slide the spring onto the retainer. The screw head acts as a wider lip, keeping the spring firmly in place.
3 - Mount & Adjust: Install it back onto your plate. Since the screw is flipped, simply adjust your pre-load from the underside of the chassis!
 
3 - Mount & Adjust: Install it back onto your plate. Since the screw is flipped, simply adjust your pre-load from the underside of the chassis!
No more slipped springs mid-run. Give this a shot on your next build!
|
