Our competitor in the competition 1/28 market, with race bred design features and a economical price point. Stability and ease of assembly was put as a top priority whilst designing the Pixel Z1.

Extra long suspension arms allows for easier control in corners by slowing down the camber change. Easy to build gear differential offering consistent performance on high grip RCP tracks. Included body mounts follows traditional mounting pattern, which allows you install hard plastic bodies without modification.

Here's what you can expect when you finish building your Pixel Z1, with a wide assortment of rims to choose from inside the kit!

Caster is adjustable by adjusting the shims on the upper arm mount, move the shims towards the front or back to adjust!

Direct steering servo horn for the fastest and a direct steering response! Ackermann and bump steer can be adjusted through adding shims under the ballstuds.

Grease filled side dampers for a more consistent handling car, change to thicker or thinner greases for a different setup according to track conditions.

Adjust pod droop with the adjustment nut in the center damper, which is on a threaded shaft for easy fine tuning through tightening or loosening!

Battery compartment designed for medium sized hard pack LiPo's out of the box. Included o-ring allows for easy and secure battery mounting.

Narrowed chassis plate for less scrub on bumpy RCP surfaces for more consistent handling.

Included is a 64p gear differential and two different pinions for you to choose from according to what speed motor you are running!