Driver – Felix Law
Chassis – Xpress XQ2S Mid
Motor – Maclan MRR V2 4.5
ESC – Maclan MMAX Pro
Batteries – Maclan 5500mah
Tires – Xpress V3 40x
Radio/Servo – Sanwa/Sanwa SSL LH2
Bodyshell – JConcepts A one Racer 2
Stuff to talk about: Decide to run the Entrée level fiberglass/Plastic car per request of Michael RC hobbies. The Xpress XQ2s chassis is a popular seller for those who are just getting started. With Felix able to use this car to showcase the potential of an entrée level chassis, he also went ahead to equip some optional parts in order to enhance performance in the Modified class. The most noticeable optional are the Mid motor conversion and the X square Front and Rear upper bulkhead. These options allow the entrée level chassis to become a modern /fresh looking car for nearly 1/3 the price of its competition.
Xpress XQ2s Optional list:
- Xpress XP-90032 XQ2S 1/10 Sport Touring Car Kit
- Xpress XP-10690 Mid Pulley Conversion Kit: XQ1S XQ2s
- Xpress XP-10114 Xpress Aluminum FF 1 Piece Suspension Mount For Execute Series
- Xpress XP-10123 Xpress Aluminum 2 Piece Suspension Mount 2pcs For Execute Series
- Xpress XP-10127 Eccentric Bushing Set: XQ1 XQ1S
- Xpress XP-10166 Xpress Steel Double Joint Universal Shaft 2pcs For Execute Series Touring Chassis
- Xpress XP-40063 5x10x3mm Double Joint Universal Bearings (2)
- Xpress XP-20015 Aluminum Wheel Hub Hex Offset 4.5mm: XQ1 XQ2
- Xpress XP-10629 Xpress Aluminum 20T Center Pulley Set A For Execute XQ10
- Xpress XP-10632 Xpress Aluminum 20T Center Pulley Set B For Execute XQ10
- Serpent SER401854 Spring fr/rr 2,7 (2)
- Serpent SER401853 Spring fr/rr 2,6 (2)
- X-Square X2-0025 X-Square Aluminium FR Spilt Suspension Mount Set For Xpress XQ1 XQ1S XQ2S XM1 XM1S FT1 FT1S XQ10
- X-Square X2-00107 X-Square Front Low Profile Shock Mount Upper Bulkhead For Xpress Execute XQ10 XQ1S XQ2S
- X-Square X2-00108 X-Square Rear Low Profile Shock Mount Upper Bulkhead For Xpress Execute XQ10 XQ1S XQ2S
- Yeah Racing YA-0611 Yeah Racing Tornado Twistex 30mm Shrouded Cooling Fan
- Yeah Racing YA-0390RD Yeah Racing Aluminum M3 Flat Washer 0.25 / 0.5 / 1 / 1.5 / 2 / 2.5 / 3mm 10pcs Set Red
- Yeah Racing SS-314ST Yeah Racing Stainless Steel M3x14mm Hex Socket Screws 10 pcs
--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Felix decided to run the entry level fiberglass/ Plastic car per request of Michael RC hobbies. The Xpress Execute XQ2s chassis is a popular seller for those who are just getting started. With Felix able to use this car to showcase the potential of an entry level chassis, he also went ahead to equip some optional parts in order to enhance performance in the Modified class. The most noticeable optional part are the Mid motor conversion #XP-10829 and the X square Front and Rear upper bulkhead. These options allow the entry level chassis to become a modern fresh looking car for nearly 1/3 the price of its nearest competition.
As Felix is sponsored by Jconcepts, their bodies are his standard choice and the results speak for the ability of those shells.
![](1.jpg)
A full view of his XQ2s which Felix used to top qualify, but hit a stranded car in the finals at high speed and that unfortunately ended his chance to win the event.
![](2.jpg)
![](3.jpg)
![](4.jpg)
A look at the power system, like the bigger brother, the XQ2S features a channel to route your signal wire neatly.
![](5.jpg)
![](6.jpg)
A very popular upgrade throughout the Xpress racers are these low center of gravity upper bulkheads which remove the need of a shock tower.
![](7.jpg)
![](8.jpg)
To keep the car cornering flat, Felix also upgraded the car with the Anti-Roll Bar set to make the car more predictable through the corners.
![](9.jpg)
![](10.jpg)
XQ2s mid setup is on the XQ10 sheet because it's been convert to mid, it's closer to the XQ10!
|