Chassis – XPRESS XQ11RR
ESC – Hobbywing XR10 G3
Motor – ZOMBIE EVO2 5.0T
Battery – Fido 5000mAh
Tires – Rush (handout)
Radio - Fly Sky Noble NB4 Pro Plus
Servo –Power HD GTS-2xp
Body – Xtreme Twister UL
Yugo offered some explanations of the optional parts he used for this race:
XP-10921 Titanium Spool Cup for 4mm Blade
XP-11292 Adjustable Upper Arms By using these and setting the upper mount caster adjustment spacer to 0mm, the upper arm mounting point can be moved closer to the center of the car, resulting in smoother cornering.
XP-11096 Separate Front Top Deck 2mm This kit uses a separate top deck. Additionally, by cutting three connecting sections, you can increase the front chassis flex and create a more "flexible" feel. If you experience excessive flex, try leaving only the section closest to the first spur gear uncut.
XP-11111 Separate Rear Top Deck 2mm This is also a separate rear top deck. This can also be cut to your liking, but I personally cut the connecting part on the bulkhead side.
XP-11098 Front Brace 1.6mm This is a front bulk brace. I'm using the softer version. Using this brace improved response at the start of corners and reduced stalling at the back of corners, allowing me to accelerate earlier.
Please refer to this photo for the orientation of the adjustable upper arms introduced earlier when installing them.
The turnbuckles are also made using the new aluminum turnbuckles XP-40292, XP-40293, XP-40294, and XP-40295, each in their respective lengths.
