40wt all around
1,2 mm 2 hole's pistons all around

front:
2,5 susp mount front
1 mm spacer's (arm level, no anti dive or kickup)
4 degree caster
turnbuckle front as long as possible with 1 mm spacer inside
shock position outside (up and down)
0,5 degree out
ackermann: arm long(2) and mid
one way (spool when it's raining)
5,5 1,4 mm spring

rear:
3 degree susp mount
1,5 mm spacer's (arm level, no anti squat)
turnbuckle: outside 1 and inside the most inside, outside 2 mm spacer and inside 0,5 mm
shock position: arm mid, tower outside
5,5 1,4 mm spring
thin anti roll bar
upright: back(only at the front spacers)