- Tamiya TRF417 - Ed Clark - TRS - HW Cup - 17-18.09.2011 -
This was the one I would use as my base outdoor setup these days.
Uses cut motor mount and top deck.
Things I would look to alter first to tune into the track (in no particular order)
- Droop
- Shock oil
- Rear camber link shims
- Split suspension blocks
HiH
Ed
Where is the droop measured from?
I use a gauge under the outer hinge pin. Works out to around 8.5/7.5mm to the pin centre (exactly as the sheet shows). 6/5 droop didn't work out too well on the HW track, didn't allow the car to "bite" in the surface.
PDF File
![](setup.jpg)
Source:
![](/reglages/thard416.gif)
![](/reglages/LogoSetup.jpg)
|