Front

Middle hole on Tower
Tamiya 400 Wt 3 hole pistons
3.5mm under camber link in middle hole
Furthest hole on A arm
4mm hex hub .5mm spacer
416 D front and 416 D rear flat
HPI silver spring
5mm Ackerman
0.5mm bump steer spacer
Droop 6
Arm spacing 2 mm front 2mm rear

Rear

3rd hole out on tower
Tamiya 400 wt 3 hole pistons
3.5mm under camber link middle hole
3mm spacer outside hole rear hub
HPI Blue spring
2nd hole outside on a arm
4mm hex hubs
1XA rear front 1D rear
Arm spacing 3mm front 1mm rear

Full rebound in shocks but nothing on top of bladder

Tires: Sorex 36 on SpeedMind Rims

Body: Mazda Speed 6