3.5 brushless setup but it should be good in stock and 19t

Front

4 degrees caster
.5 degree toe out
4.5 mm ride height
6.0 mm droop (droop gauge)
1.5 degree camber
1.5mm shims under both front and rear pivot blocks
3.0mm shim under inner camber link (long camber link)
30wt shock oil
shock lenght 66.5mm
2 hole piston
20% rebound
Tamiya Yellow spring
shock mount 3rd hole from the top
outter bottom shock mount
red sway bar

Rear

3.0 degrees toe in
6.0 mm droop ( droop gauge)
1.5 degree camber
1.5 mm shim under both front and rear pivot blocks
no shim under camber link on rear hub(mount in middle hole)
1.5 mm shim under inner cambelink
30wt shock oil
shock lenght 66.5mm
2 hole piston
20% rebound
Tamiya Yellow spring
shock mount 3rd hole from the top
middle bottom shock mount
yellow sway bar