Front

Arm type Graphite

Caster block New medium type

Roll bar  Gold

Upper shock position  3^rd in

Lower shock position  Outer

Piston Tamiya #3

Oil 40wt

Rebound  50%

Spring  HPI Pink

Upper link width spacer  2.5mm

Upper link height spacer  2mm

Wishbone width spacer 2mm all round

Wishbone height spacer 2mm all round

Ackerman plate, short balls close together, base plate 3^rd hole back

Camber:  2 degree

Toe: + 1

Droop 4.5mm at bottom of arm

No Hex spacer

Rear

Arm type Graphite

Roll bar Silver

Upper shock position 3^rd hole in New wider tower

Lower shock position 3^rd out

Piston Tamiya #3

Oil 40wt

Rebound 50%

Spring HPI Silver

Upper link width spacer 2.5mm

Upper link height spacer 4mm

Upper link outer inner hole 0 spacer

Wishbone width spacer 1mm front 0.5mm rear

Wishbone height spacer 3mm all round

Droop 5.5mm at bottom of arm

Camber: 2 degree

1mm hex spacer

Chassis 2.5mm hard 6 cell

Ride height 5.5mm all round

Top deck  Std fitted backwards

Gray belts

Servo horn modified, ball mounted between upper and lower hole, High hole makes the steering to fast, lower to slow and restricts lock