Front suspension

toe straight
ride height 5 mm
kick/antidive 0
caster 4 deg.
droop using losi droop guage 3 to bottom of screw
front pivot 0 deg.
roll center mid .030 shims under all pivot blocks
arm spacing mid
shock position 2
steering rack 2
spindle ackerman 1
camber link standard camber link position 1
camber ball stud short
sway bar .030
front drive spool
grease type losi
front pulley 42 tooth
diff height high
drive axle lcd
hex width .165
oil 40
piston .56
spring 15
bladder losi black
above bladder tamiya red foam

Rear suspension

toe 3 degrees
ride height 5 mm
droop using losi droop guage 5 mm
camber 1 degree all 4 wheels
anti pro squat 0
hub standard
rear pivot 2 deg.
roll center mid .030 shims under pivot blocks
arm spacing arms pushed all the way forward
shock position 1/outside
camber link 5/a
camber link ball stud stock
sway bar .020
diff height low
drive axle rcd
hex width .165
oil 30
piston 56
spring 12.5
bladder losi black
above bladder tamiya red foams

Extra informations

gearing 128/41
body protoform mazda 6
checkpoint batteries
transponder was middle of chassis on right side
i had to add 20 grams of weight right next to transponder
tire sauce was buggy grip on new tires old tires i used ragu