<<BACK

1/10 R/C ELECTRIC POWERED 4WD TOURING CAR

TF-5 Stallion SHIN Conversion Set


No.TFW100   Kit

□Available : 20 Jul 2007

Perfectly suited to controlled tires.
Turbo-boost your Stallion with the new SHIN Conversion!

The performance potential of the belt-driven 4WD touring machine TF-5 Stallion is turbo-boosted with the new SHIN version. Japan’s famous touring car driver Shinnosuke Adachi has applied all his skill and knowledge in adapting the latest racing technology to this special version of the TF-5. Strengthened for even higher performance under equalized race conditions, each relevant section has been optimized relative to accepted controlled tires for improved grip from the chassis. Revised shape and thickness of chassis, upper deck and shock stays effectively reap the benefits of the improved flex characteristics. In addition, the 1.5mm shortened rear lower suspension arm results in a modified stroke for improved grip. This doesn’t just result in higher rigidity, but also realizes improved traction. Also, the optimal position of the battery and servos delivers a higher concentration of mass. While maintaining the same akerman ratio, a revised control angle delivers an improved linear steering feel. Of course the wide scope for optional settings allows the full potential of the chassis to be reached on many circuit layouts. Not only does the SHIN version represent a huge saving to purchasing the parts separately, the complete SHIN version can only be achieved with the Conversion Set that evolves your STALLION into the best racing machine possible.

No.TF124 Main Chassis

 

No.TF125 Front Upper Deck

 

No.TF126 Rear Upper Deck

No.TF127 Front Shock Stay

 

No.TF128 Rear Shock Stay

 

No.TF129 ST Servo Mount Plate

No.TF130 Aluminum Center Bulkhead R

 

No.TF131 Aluminum Rear Suspension Holder L

 

No.TF132 Steering Crank

<Conversion Set Main Contents>
  • No.TF124 Main Chassis
  • No.TF125 / No.TF126 Upper Deck (F / R)
  • No.TF127 / No.TF128 Shock Stay (F / R)
  • No.TF129 ST Servo Mount Plate
  • No.TF130 Aluminum Center Bulkhead R
  • No.TF131 Aluminum Suspension Holder (L)
  • No.TF018-01 Suspension Bushing Holder (A – F)
  • No.TF132 Steering Crank
  • No.TF133 Suspension Arm (F / R)
  • No.LA221 Servo Saver
  • No.W5181-03 Shock Piston
  • No.96441B Double-Sided Tape
  • 3x7x1mm Aluminum Collars
  • 4x6x0.2mm Shims
  • 3x8mm Button Head Cap Screws
  • 3mm Nylon Nuts
  • Instruction Manual
  • Decals
  • Setting Sheet

□Last updated:16 Jul 2007

PAGE TOP