Destiny RX-10SR New Features

  • New design 7075 aluminum front and rear suspension mounts. Three different size of suspension mounts to makes wider range adjustment on track width from 40.7-49.5mm.
  • New design plastic eccentric bushing for suspension. Fine adjustment on toe-in and toe-out angle in 0.3 degree per step.
  • New design front and rear lower 7075 aluminum bulkheads. 1mm down on transmission.
  • New design 7075 aluminum motor mount. Motor position forward/backward changeable. It makes difference setup of weight transfer on corner response.
  • New design single piece 7075 aluminum servo mount and steering mount. It makes change on chassis flex to improve the steering.
  • New design transmission ratio changeable to compatible with difference race classes, track size or condition. 37T/20T in ratio 1.85, 38T/20T in ratio 1.9 and 40T/20T in ratio 2.0.
  • New design front and rear shock towers. Made by USA high grade graphite materials.

Destiny RX-10SR Features
  • 2.25mm USA high grade graphite materials for narrow design main chassis, 2.0mm for upper deck and 3.0mm front and rear shock towers.
  • 2/4/6 deg caster insert is selectable to assembly to c-hub. Large open on c-hub for easy install or remove front cvd.
  • All new design on steering knuckle. Re-position ball bearings and CVD joint CENTER. Maximum decrease the noise and wheel vibration. Maximum increase steering efficient and cornering speed.
  • All new design aluminum wheel adaptors. Lightweight and reliable on drivetrain.
  • High grade composite front and rear lower suspension arms, steering knuckles, c-hubs and rear hubs plastic parts from Xenon Racing
  • Bearing steering rack system design. More proportional and smooth steering feel. Quick and easy ackerman adjustment.
  • Full set low friction coating aluminum damper balls and ball studs.
  • 7075 aluminum rear cvd dogbone.
  • High precision 4 gears differential with 7075 aluminum weight reduced gear drive cups.
  • High quality and lightweight plastic front spool set.
  • 7075 aluminum steering and upper link turnbuckles. Black color anodized.
  • High quality hard coated short dampers with POM pistons and 20mm damper springs.
  • One piece motor mount design with special function of multi chassis flex adjustment by mounting screw position.
  • Bearing supporting front and rear anti-roll bar system.
  • 64P 114T spur gear from Xenon Racing
  • 17 pcs high grade ball bearings.

Source: