Highlights:

  • Used Spool
  • Excelerate tires (fronts glued a couple mm onto flat surface, Position #5 on JP3D Excelerate Tire Marking Template.
  • 7/.5 CC Plates
  • Ran new adjustable rear wing mount in position #3 (slightly higher than stock)
  • Ran electronics on upper deck instead of lower deck, using prototype electronics tray from JP3D
  • Used new CRC split rear deck on top of JP3D lowered side dampers with 100k Excelerate grease.
  • .50 springs all around
  • approx 4.5 ride height all around
  • Used Excelerate body. Had to drill new rear body mount holes moved further in, and dremel off the outer wing portion of rear deck, to allow body to fit.

    		•

    Source: