Overall

Body : CRC Parma Speed8
Chassis : Generation-X JSPEC Type2
Traction Compaund : Paragon FX2 : Front7mm 10 min : Rear 15min + Coppertone
Tire : Front CRC Purple 41.3mm / Rear CRC Gray 43.3mm
Wheels : Front CRC HR-38 / Rear CRC HR-38
Gear Ratio : 96T / 25T
Ride Height : Front 2.0mm / Rear 2.0mm
Battery Position : Rear side
Position of ant mount : Rear
Weight : 863g(Include AMB)

Front

Spring = 0.55 TRINITY
Camber, caster and toe = 1degree / Shim at back of castorblock / 0.2 mm Out
Castor Block : 10degree
Front Graphite brace(CRC#3277)
Ultra Front Pivot balls
Ride Height Spacer : 5mm plastic Spacer + Fiber Lyte Spacer 1mm
Rebounds = 0
Front brace = graphite brace
width = 167 mm
CRC servo mount = Low Profile servo mount
Servo saver : kimbrough small middle hole

Rear

Roll Center * = Normal + O ring(TC damper for the 30 °)
Side Spring = CRC Blue
Friction Flude : # 3000
IRS ride height = 1.0
Shock Center = CRC DURA SHOCK
Oil / shock spring: TRINITY # 50 / Black Wind Tunnel
Center shock mounting angle: 2.1mm spacer under antenna mount + 1mm spacer between front side pivot ball and anntena mount / 2.5mm raised top plate
rebounds : about 0.7 mm
width = 171.2 mm

Other

Motor: Checkpoint Br00d Team  8 x 2
INFINITY Brush both sides cut 0.2 mm. Medium-hard spring Timing 1
Battery = DryHop IB4200VR-1X
ESC＝ Advanced ESC 5.1 (5.0k drive frequency)
Additional battery VXR Racing　Li-Po 120mAh
Servo = 3401
Receiver = 203 F

Body: CRC Parma speed 8
Chassis = JSPEC Type2