XENON XR12
|
- Carpet Knife J-Spec - - Crest Speedway - December 17th 2006 - Mats from Team Denski - |
Race Report from Kimihiko Yano
|
Front Spring: [torinitei] 0.55mm rebound approximately 0.2mm Camber caster toe: -1°/white shim front and back 1/0° The knuckle: nylon it starts shaving, the + titanium axle King pin shim: on knuckle under 3 knuckle 1 Height: approximately 2.5㎜ Rear Damper oil spring: CRC DURA shock/[tamiya] 1000th/lead-lead Damper length: as for 70mm and anterior post [asoshi] make Friction grease: capital trade #3000 Ride height adjuster: IRS-2.0mm Side link: 1 piece links Side spring: lead-lead The O ring under the center pivot: it is Height chassis side: approximately 2.5mm Height rear: approximately 2.5mm Tire diameter wheel: Front - CRC purple 42mm JACO white/Rear - CRC pink 43mm TRC black Tire traction medicine: HG and front 9/10 coatings Body: CRC speed 8 Battery: SMC IB4200WC The frequency of motor winding: Reedy Ti 9TW Pinion spur: 92/25), exponent: 36.7 The amplifier servo receiver: Futaba MC800Cver2/ Futaba S9650 flat you put,/ Futaba 303SHF Receiver power source: none |
XENON XR12
CRC CK J-Spec
CRC CK3.2R
Speed Merchant REV4
Source:
