- CRC Carpet Knife 3.2R -

-Team Denski Jidõsya -

- RockWave -- Pratice -- 28.06.2006

Front:

Tire diameter wheel -HPI J rubber 42mm ・ カワダ
Tire treatment - 4/5,  TC4 
Spring  - トリニティ 0.55mm rebound mm)
Camber caster toe  - white shim after the 1°/ 2/0°
Knuckle - normal + titanium axle
King pin shim  - on arm on 1, under 3 knuckle 3mm
King pin grease - It is none
Height approximately 3mm

Rear:

Tire diameter wheel - JACO pink 43 mm, JACO white )
Tire treatment (コラリー TC4
Damper oil spring  - CRC DURA shock/タミヤ 700th/lead-lead
Damper length  - 69mm
Friction grease  - capital trade # 5000 
Ride height adjuster  - アソシ #4
Side link  - 3 piece links
Side spring  - lead-lead 
Height chassis side approximately 3mm

Comments:

Rear tread spacer (173mm)
Body (プロトフォーム SPEED12B)
Battery count average discharge voltage (ヨコモ X3800IB SG1/? Second /? V)
Motor winding several brush spring (ECHO + 9×2/cutting brush)
スピニオンスパー (94/26) and exponent (38.2)
Amplifier servo receiver (フタバ MC800Cver2/フタバ S9650/ フタバ 203HF)
Servo saber pyro ball type & pyro ball interval (キンブロー/middle hole)
Receiver power source (GP200)

Original Page

 

From