Chassis Awesomatix A800 Motor LRP X20 4.5T ESC LRP Flow Batteries LRP LCG 5600mAh Tires Sweep (handout) Radio/Servo Sanwa/Highest Bodyshell Protoform LTC-R Remarks Runner up at the recent Italian round of the ETS, Viljami Kutvonen started here at the Tamiya Raceway with his car and setup from Riccione but has since made some small adjustments. Running less droop, he also changed to higher front roll centres to get more steering. In terms of car he is using new rear suspension arms with built-in rear toe as well as upper arm mounts that reduce caster flex. The Finn is also using revised thicker shock parts that remove bad flex into the cars innovative shocks.
Body: PROTOform LTC-R Light Weight Body Position: +5mm forward Front Splitter Height: 3mm... Wing: PROTOform Pro-TC Stiff Wing, High Downforce Wing Position: 2mm back from front of wing standoff Wing Height: 18.7mm Painter: Fun Brush Decals: Fun Parts Tools Used: Curved Lexan Scissors, PF Better Edge Sanding Drum Accessories: PF Anti-Tuck Body Stiffeners, Fun Parts Wing Buttons, Bumper Foam Total Weight: 107g
