STANDARD SETUP FOR THE RC10L2

date: ____________ driver _________________ track ____________________
FRONT SUSPENSION Upper arm mount: 1 Caster shim position: 2 Front ride height spacers: _#8179 Steering block: STD Camber, left -2 deg.    right -2 deg. Toe-in 0 deg.    Toe-out 0 deg. Spring:  L2 = .018"  L20 = .020"			FRONT SPRINGS Springs: L2 = .018, L2o = .020 Kingpin: STD Indicate shim position, qty and thickness: 1: thickness __________ qty 4 2: thickness _______ qty 1 3: thickness _________ qty 0
SHOCK Body: STD (.56) Oil 30wt Spring, L2 black Spring, L2o silver Limiter, inside 0   outside 0 Clamp to cap dist. __________ Piston # 1			REAR SUSPENSION Circle the axle height adjuster used (2nd from left) T-bar thickness: .075" Dampener lube:  no Dampener springs: STD #4517  Roll stop insert:  none T-bar flex:  2 holes
WHEELS & TIRES	Front	Rear	Chassis: STD Car body ___________ Wing/spoiler ___________ Motor ___________ Pinion ____ Spur gear _____ Battery type 6-cell Indicate battery placement: L2 L2o L2=top 3 holes, both slots, L2o= right 6 slots
Tire type	8141	8165
Tire dia
Stagger
Car width
Wheels	8141	8165