HOME PAGE

Team Associated RC10L4O

RC10L series • 1:10 scale • electric powered • oval car

Team Associated's Factory Team RC10L4 Oval, the first "4-Series" car, has been developed from input from the top oval racers in the country, like Daryl Silva, 2001 Snowbirds Nationals winner and TQ and Sean Cochran, who debuted the L4 Oval by winning the 2002 NORRCA National Carpet Oval Championship. The L4 Oval is built on the Factory Team graphite "bias-tray" chassis, previously available only as an upgrade kit. This chassis features a moveable 6-slot battery tray for shifting the weight of the batteries forward and backward as needed. An optional 4-cell tray is also available.
The L4 Oval also includes numerous other Factory Team components, such as blue aluminum nuts, screws, and ballstuds, blue right-side motor mounting bulkhead, blue aluminum inline front axles, graphite front bumper with lightweight foam on top for additional impact resistance, and more. It's the most advanced, competition-bred oval kit ever offered by Team Associated.

Kit Features

The L4 Oval chassis features a moveable 6-slot battery tray for shifting the weight of the batteries forward and backward in .15" increments, and from the extreme left to nearly center.
 

The suspension of the L4 Oval is handled by a .075 fiberglass symmetrical T-bar and dampened by three blue-anodized aluminum oil-fill shocks. A threaded-body VCS Macro Shock with a hard coated, wear-resistant Unobtainium shock shaft is used in the center, with two VCS Micro shocks used for side-to-side dampening.
The center shock is the VCS Macro Shock, a lightweight shock with Team Associated's exclusive Volume Compensating System for the smoothest possible, most consistent dampening. A full assortment of different springs are available for both the VCS Micro and Macro Shocks for greater tuning options.

The rear pod of the L4 Oval now comes standard set at the full offset position, and the rear axle/differential assembly consists of all-new IRS (Irrgang Racing Service) parts. The graphite "Pro" rear axle features a locking D-ring differential -- no pinning needed. The right diff hub and the double-clamp left hub are also blue anodized IRS components.

Team Associated’s new featherweight (approx. 1/5 oz.), high-density foam bumper (not shown) protects and supports the front of your oval car’s body, and provides excellent chassis protection from the high-speed impacts of oval racing. It comes with the body post holes already in place. The L4 Oval's bumper is a completely new design.

At the front of the L4 Oval, Team Associated's race-proven Dynamic Strut front suspension has been augmented for oval racing with IRS' adjustable aluminum front arm mounts, which provide 6-position mounting of the upper (camber) arms to fine-tune the L4 Oval's roll center, increasing or decreasing sensitivity to steering input. Factory Blue titanium turnbuckles are also included for their high strength and low weight.

Datasheet

DOWNLOAD full color datasheet of the RC10L4O in PDF format.

Looking for the 10L3 Oval?

EXTRA ITEMS NEEDED

R/C 2-channel surface frequency radio system.
Battery pack (6 cell).
Battery charger.
Electronic speed control.
R/C electric motor.
Pinion gear, 48 pitch.
1:10 scale Lexan body and wing.
1:10 scale on road wheels, and foam or capped tires.

Prices subject to change without notice. Not responsible for typographic errors.