RC12L series • 1:12 scale • electric powered • pan car
Team Associated's championship-winning 1:12 scale kit is now optimized for 4-cell competition, and has been given the full Factory Team options package. We started with a redesigned graphite chassis, now flat-fronted with twin mini-bumpers for impact-damage resistance, and with tweak reference center holes already drilled in. The steering servo mounts are all new Factory Team blue aluminum items with multiple mounting points to fit most servos.
 |
|
The front suspension has been redesigned with new upper arm mounts which allow 0, 5, or 10 degrees of reactive caster. The precision-ground upper hinge pin is now secured with two set screws, and cross-support is provided with a floating carbon fiber cross brace.
The 12L4 features unique molded adjustable battery trays which allow the cells to sit as low as possible in the chassis, without having to file the graphite chassis battery cutouts. These trays provide approximately .150" (4mm) of battery movement to shift the weight of the cells forward for more steering, or backward for more rear traction.
The blue 7075 T-6 aluminum rear hubs are all new, with a single-clamp style left hub, and a dual-bearing supported right diff hub featuring the large "D" style locking diff rings (allowing the greater diameter ball pattern) as preferred by most of our Team drivers. The graphite-thru, Pro-style rear axle is from IRS.
The rear suspension has also been optimized for 4-cell competition, using a single VCS Micro-Shock, a thicker, more rigid upper graphite pod plate, and your choice of two included fiberglass T-bars, .063 or .075".
Associated's winning record in 1:12 scale competition is unequalled, and the new 12L4 was designed with input from many of the top 1:12 scale racers in the world, including Mike Blackstock, winner and T.Q. of the 2004 Snowbirds Race, and Jon Orr, winner of the 2004 U.S. Indoor Championships at Cleveland.
>
Associated’s VCSTM Micro Shock with its Volume Compensating System
results in the smoothest, most consistent dampening ever. It became
an instant hit even before it’s introduction in the RC10L3 Oval.
Optional springs are available for more tuning possibilities.
These battery trays provide approximately .150" (4mm) of battery
movement to shift the weight of the cells forward for more steering,
or backward for more rear traction. Just lift out, turn around, and
put back in.
The precision-ground upper hinge pin is now secured with two set
screws.
The blue 7075 T-6 aluminum
rear hubs are all new, with a single-clamp style left hub.
The front suspension has been redesigned with new upper arm mounts
which allow 0, 5, or 10 degrees of reactive caster.
Flat-fronted chassis with twin mini-bumpers for impact-damage
resistance.
All
new Factory Team blue aluminum steering servo mounts have multiple
mounting points to fit most servos.
DOWNLOAD full color datasheet of the RC12L4 in PDF format.
Looking for the RC12L3?
R/C 2-channel surface frequency radio system.
Battery pack (4 cell
saddle pack only).
Battery charger.
Electronic speed control.
R/C electric motor.
Pinion gear, 64 pitch. Size to be determined by type and wind of motor.
1:12 scale Lexan body.
1:12 scale wheels and tires fitting 3-hole hub.
|
Team Associated has won more IFMAR World Championships than any other manufacturer! |
|
Associated Electrics, Inc. |
www.teamassociated.com |
Prices subject to change without notice. Not responsible for typographic errors.