Find out my latest Specs & Setup sheet from sunday‘s RCK Challenge TQ & WIN.

Like any other drivers from the ARC Team I flipped also the steering arms to the upper position.

It gaves you a better feeling to the A10-25 and more Corner Speed.

This also needs much less spring pressure for the min. Ride Right with the 17mm.

Note on FLIP SPEC:

  • Put 2mm shim under the steering posts
  • You should need 7.5-8mm Shim under the Steering Bridge to Limited max angle. ⚠️ I used the 3d printed Collar from EC Kim. But you also can secure alloy Shim with an nut first
  • Front Bumpsteer Range: 5-6mm
  • Rear Bumpsteer Range: 2-4mm

Source:

M. Schmutzler