- Alexander Hagberg - Tech Tips - Body Mounting Positions LensBodies Ponente -
As promised, here's a mounting guide for the LensBodies Ponente bodyshell. I used the UL (Ultra light) version.
The body was mounted 2-3mm forward (that's the way that I usually mount all 12th scale bodyshells). The front lip went as low as it could go, and I raised the rear of the body for more rake.
For racing on CRC Carpet, I recommend running the front lip at least 2-3mm higher to prevent it from dragging. I also recommend running less rake (the rear height of the body preferably at 80-82mm of height. More rake = more downforce, more drag, but more overall grip.
To describe the handling of the body, the best description that I can give is that it's close to an AMR, but with more corner speed!
The front bumper and body supports are from MilanSport! The paintjob is by Apaint!
![](1.jpg)
![](2.jpg)
![](3.jpg)
![](4.jpg)
![](5.jpg)
![](6.jpg)
![](7.jpg)
![](8.jpg)
![](9.jpg)
|