|
- 3-Racing Cero Ultra ACE -
Features:
- Double Wishbone Suspension
- Dual Positioning Motor mount
- Graphite Composite Upper Wishbone
- Bulit in Refill Differential
- All NMB (Japan) made Ball Bearing
- Pre-Builted 5/5 Belt Figure
- (44mm) Low Profile Absorber
- (KPI) King pin Inclination Fender stiffener
- (KPI) Drive Shaft
- 2mm 7075 Aluminum Chassis
- Lowest Centre Gravity from our previous Chassis (*The photograph is illustrated placed belt at the central . / Equal output on each wheel)
- All New Design Touring Chassis Platform
- Harder Composite Upper Wishbone Arms (Parts No: SAK-C134 / SAK-C149)
- Define the front or rear from the outer edge
- Put the front at the rear can get a 1.5mm shorter wheelbase
- More solid driven geometry from harder composite
- Narrowest spool housing present
- Up to your body setting placing the rear posts horizontal or vertical (SAK-C156/ SAK-50)
- Tiny Knuckles
- Improved using 6 x 10 x 3mm to reduce vibration from tires, comes with 3mm thickness hex as standard and 3.5 or 4mm optional.
- Separate Graphite Upper deck
- Simply to adjust the response from the front or rear by the step screw
- Changing to 50/50, a 5/5 up-deck and 2 pcs of 351 belts are needed
- Used 3mm premium graphite instead of general composite nylon lower wishbone (SAK-C106/C109/C110)
- More sensitive from the ground that you will feel, stable and consistent drive improved
- Used pivot ball and bushing instead of parallel pin
- Cero ultra new designed bulkhead attached the shock tower, setting the damper geometry by the shim
- ARS pre-build, with twist bar alignmentsocket pin on the bottom, top socket for the upper linkage mount (SAK-C116/C125/C127)
- Socket pin on the bottom, top socket for the upper linkage mount (SAK-C116/C125/C126)
|
