Reinforcing Rear Hub Camber Link Holes
To prevent the rear upright screw holes from breaking in a serious crash, thread an M3x5 setscrew into the hole beside the hole used for the camber link screw. 1. Remove the camber link screw.
To prevent the rear upright screw holes from breaking in a serious crash, thread an M3x5 setscrew into the hole beside the hole used for the camber link screw.
1. Remove the camber link screw.
2. Install an M3x5 setscrew into the adjacent hole.
3. Reconnect the camber link to the rear upright.
Source:
