Just finished wiring these 2 cars for Matthew Keene. As you can see the YZ2's are meticulously wired. Here's a quick run down of what actually went into the wiring of the cars. Firstly the receiver wires for the RC concept speedos were changed to a black wire, clear heat shrink on the capacitor was changed to black, capacitor wires were both changed to 18 awg silicone black wire, MRT PT wire was shortened, servo wires changed to a black, 14awg black wire fitted for the motor wires and battery wires, MR33 battery plugs fitted, alterations made to side pod to enable more room for the receiver. I've also fitted a Schelle racing YZ2 adjustable battery strap, so a massive thanks to them for supporting Nextlevelrc. Let me know your thoughts! Thanks Ben Jemison