- Yokomo B-Max2MR - Takeshi Shimizu - RC Maniax Arena - 12.01.2014 -

The basics are setting Ido players.
* spring oil and rear, upper mounting position, the wing has changed. It is together after. I will run well Truly.
* The upper link mount on the rear, I have to cut flat.
* piston is 1.6mm × 2 front and rear flat.
* new rear hub in (B4-415R00), upper mounting position is second from the outside. This position will be the outside of the old aluminum hub.
* rear hub short wheelbase. ( Two shims behind )
* The front inner, use and purpose to make strung, hard to sweep the permanent set. This is a fine point. Front inner is soft, it will be dizzy.
* rear, Masu worn but, AKA is recommended or Proline lateral grip is high. When I have to run a little from new, it became slightly softer is delicious.
* new tires do not grip. When the road surface of thirst feeling, and you'll run about three pack, you will be grip. ( If it is. Wheel drive about 10 minutes When it is dry road surface, if the conditioned by shaving in the pavement, it's not really grip, you can shorten)
* setting of the ESC is the guy 2WD Adachi player.

Source:

RC Maniax