Front

Camber link: 1B with 2 washers
30* caster blocks mounted forward
Trailing axles at middle height
0 bump steer washers
Steering Ackerman forward
Camber: -1°
Slight toe-in

Shocks: Losi

Mounted 2/2
Red springs
56 piston (red)
30 wt oil
.090" limiting inside

Rear

Transmission lowest setting (no washers)
4° toe block
.030" antisquat shims
Camber link: 1B with no washers
Arms and Hubs in the center

Shocks: Losi

Mounted 2/3
Pink springs
56 piston
30 wt
No limiting

Ride height

Set the cvd's level in the rear, then adjust the front so the chassis is level.
1 oz of weight in the rear of the chassis, a half-oz on either side of the motor

With a 13.5 I geared my truck at 26/78 (the 78 spur will come with the truck) and it felt right on - motor got a little soft at the end of a 7 minute main with 2 minutes of warm up; it was great for 5 minute runs.