- Schumacher Cougar SV - Simon Moss - Stoke -

Track condition

Stoke Nitro Track
Very bumpy astro

Front

Link Washers – 0mm
Front hole on servo bracket
Outside hole on hub
5 degree castor yoke
Hub Carrier Low
Middle hole on Shock Mount
Inside on Wishbone
45.5mm front bracket
Camber -1

Rear

Link Washers – 1mm
Link Spacer – No
Middle hole on hub
Standard Hub Carrier
Middle hole on Shock Mount
Inside on Wishbone
4 degree toe in Strap
Anti Squat washers – 0mm
Shock position – Front
Long Wheel Base
44mm Rear Bracket
Camber -2
Roll Bar - No

Shocks

Front – 30wt, 4 hole, 3.5 springs
Rear – 25wt, 6 hole, 2.0 springs (3/4 length shock bottoms)

Other

Medium Flex Top Deck (Standard with kit)
Diff Low
6.5 Speed Passion V3 geared 83x24
33/23 Gear Pulled
Reversed Front Wishbones (see explanation below)

Tyres

Front - Schumacher Green Mini Spikes
Rear - Ballistic Green Mini Spikes

What does it mean "Reversed Front Wishbones"?
Left to rigth - rigth to left or turned it self...

If you flip the front wishbones, so that you screw the shock screw into the front rather than the back, i found that it removes so of the mid corner bite you may get from the front end.

Source: