Front
Link Washers – 0mm
Front hole on servo bracket
Outside hole on hub
5 degree castor yoke
Hub Carrier Low
Middle hole on Shock Mount
Inside on Wishbone
50.5mm front bracket
Camber -1
Rear
Link Washers – 1mm
Link Spacer – No
Middle hole on hub
Standard Hub Carrier
Middle hole on Shock Mount
Inside on Wishbone
4 degree toe in Strap
Anti Squat washers – 0mm
Shock position – Front
Long Wheel Base
44mm Rear Bracket
Camber -2
Roll Bar - 1.20
Shocks
Front – 35wt, 4 hole, 4.5 springs
Rear – 30wt, 5 hole, 2.5 springs (3/4 length shock bottoms)
Other
Medium Flex Top Deck (Standard with kit)
Diff Low
6.5 Speed Passion V3 geared 83x24
33/23 Gear Pulled
Reversed Front Wishbones
Tyres
Front - Schumacher Yellow Stagger Ribs
Rear - Schumacher Yellow Mini Spikes
What does it mean "Reversed Front
Wishbones"?
Left to rigth - rigth to left or turned it self...
If you flip the front wishbones, so that you screw
the shock screw into the front rather than the back, i found that it
removes so of the mid corner bite you may get from the front end.
